BS305/BS340 12
OPERATION
Operation
Before any work on the machine itself, remove
the mains plug from outlet.
– Set the upper guide as describe previously
approx. 3mm above the height of your work
piece.
– Position the rip fence/mitre gauge as
needed/required. Please note the rip fence can
be positioned on either side of the blade.
– Turn on the LED light if required and start the
machine.
– Wait for the motor to reach full speed then
push through your work piece, using the push
stick to stop accidental touching of the blade.
– Turn of machine and LED light.
Main switch
LED light switch
Using rip fence
The rip fence can be used on both side of the
blade. When the rip fence is moved from one side
of the saw blade to other the fence needs to
reverse.
Reversing the fence
– Loosen and remove the two knobs G.
– Take off the fence with bolts from the fence
support.
– Assemble the fence with bolts to other side of
the fence support.
– Replace the two knobs G.
Clamping the rip fence
– Place rip fence on the guide rail.
– Move the fence to a needed position, the scale
indicates distance form saw blade to the fence.
– Tighten the lock lever to champ the rip fence.
G
Lock lever
