Lufft CHM 15k, User Manual

Page: 14 / 73

Operating Manual CHM 15k R13 / 07-2019
Transport / Scope of Delivery 14
5
Transport / Scope of Delivery
NOTICE
The device may be damaged if handled inappropriately.

The CHM 15k may only be transported and moved using suitable transport equipment and
lifting gear.

The CHM 15k may only be loaded and transported in the packed condition and in the transport
position (see
Figure 5).

Inside the shipping container / truck, the CHM 15k must be adequately protected against
slipping, shock, or other mechanical impacts.
The scope of delivery includes:
•
CHM 15k ceilometer
•
Ring binder with documents
o
Drilling template
o
Mechanical setup instruction
o
Electrical setup instruction
o
Test protocol
o
List of serial numbers of build in components
o
User manual and USB stick with communication software
•
Fastening components:
o
4 dowels S12 (Fischer Co.)
o
4 screws M10 x 140-ZN (DIN 571)
o
4 washers ISO 7093-10.5-KST/PA
o
4 washers ISO 7093-10.5-A2
On c
ustomer’s request:
•
An adapter frame can be supplied, which allows the CHM 15k to be screwed to existing fastening
bolts.
•
An angle adapter frame can be supplied, e. g. for 15° to tilt ceilometer away from direct sunlight.
Information about measuring units
Spanner / wrench for 4x M10 screws: 18 mm or 7/16 BSF or 3/8 Worth. A 3/8- or 25/64-
inch screw with appropriate anchors can be used instead of a M10 screw.
For further technical details, please contact G. Lufft GmbH.
Operating status of the CHM 15k on delivery
Transfer mode 1, automatic output of the standard data telegram
RS485 device number 16
Baud rate 9600
Measuring period 15 seconds
For detailed information on the operating statuses, see 8 Communication via RS485 & Ethernets
.