Lufft CHM 15k, User Manual

Page: 4 / 73

General Information 4
1
General Information
This operating manual is part of the equipment. It must always be kept close to
the equipment so that it can be accessed quickly when needed.
This operating manual must be read, understood and observed in all respects by
all persons responsible for the equipment and all persons who work on it. This
concern, in particular, the section "Safety".
Editorial deadline: July 2019
Documentation number: 8350.MEP
This operating manual is valid for the following versions of the equipment:
CHM 15k with the order numbers:
8350.00
8350.01
8350.01-BW
8350.03 8350.B050
8350.10
Manufacturer
G. Lufft Mess- und Regeltechnik GmbH
Gutenbergstraße 20
70736 Fellbach, Germany
Phone +49 711 518 22
– 831
Fax +49 711 518 22
– 41
E-mail service@lufft.de
Date Revision Firmware Notes
March 2014 IO 0.723 previous Jenoptik release
December 2014 R04 0.730
cloud algorithm optimized in precipitation cases,
parameter in RS485 / web-interface added, chapter 7-8
corrected
November 2015 R06 0.735 Fixes chapter 9, table SCI
November 2016 R09 0.743 all chapter revised
April 2019 R12 1.015 chapter 1 - 8 revised, safety regulations updated
July 2019 R13 1.020 chapter 10,11, technical data, safety regulations revised
Copyright
© 2019
This manual is protected by copyright. No part of this manual may be reproduced in any form (photograph,
photocopy, microfilm or any other method) or processed, duplicated or distributed using electronic systems
without the written permission of G. Lufft GmbH. Violations will be prosecuted.
The manual was prepared with due care. No liability is assumed for damages resulting from failure to observe
the information contained in the manual.