Lufft CHM 15k Nimbus, Manual

Page: 97 / 101

Illustrations
Revision R09, November 2016 97
List of Illustrations
Fig. 1: Labelling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Fig. 2: Functional chart, the numbers in brackets corresponds to the
numbering in the spare parts list (refer to service manual). . . . . . . . . . . . . . . . . . . . 17
Fig. 3: Flowchart of measuring and monitoring processes inside the FPGA. . . . . . . . . . . . . 18
Fig. 4: Drilling template. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Fig. 5: The CHM 15k packaged and in transporting position . . . . . . . . . . . . . . . . . . . . . . . 22
Fig. 6: The CHM 15k with styrofoam or paper honeycomp packing pads. . . . . . . . . . . . . . 23
Fig. 7: Transporting by sack barrow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Fig. 8: Position for raising and edge protection profile . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Fig. 9: Fasteners (metric parts are part of the delivery,
imperial sizes can be used instead, 3/8“screw size) . . . . . . . . . . . . . . . . . . . . . . . . . 24
Fig. 10: Connection data cable RS485 (4 wire). Designations RDA(-), RDB(+)
are used in different ways by RS485 interface suppliers. Lufft is using
the notation from B&B in this manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Fig. 11: DSL connection using the Black Box DSL Interface . . . . . . . . . . . . . . . . . . . . . . . . . 26
Fig. 12: Principle diagram of electrical installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Fig. 13: Firefox browser to access to a CHM 15k Nimbus instrument
(here with a fixed address).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Fig. 14: Web interface device menu in standard user mode. The field is displayed
as the first, and shows status information. A login as superuser or service
user is available. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Fig. 15: Web interface NetCDF files (superuser): Displays a list of NetCDF files
stored on the internal SD Card. NetCDF files can be downloaded by
double–clicking in superuser or service mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Fig. 16: Web interface/ viewer tab: It shows 24h of present data with 5 min update rate.
The latest cloud measurement is displayed on top updated every „dt(s)“ seconds.
Pressing „Update“ renews the picture.
The “BackscatterMax” parameter in the config system tab (figure 19) adjusts the
colour scale slightly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Fig. 17: Web interface network configuration panel (service mode). The static IP address,
netmask and gateway can be changed to local network conditions. „RESTART
NETWORK“ must be hit to store the settings in the network configuration file
and to use the new network settings.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Fig. 18: Web interface: configure network in standard user mode (read only). . . . . . . . . . . 58
Fig. 19: Web interface, config system upper part in service mode:
access on system configuration parts.
In superuser mode some parameters are not listed for security reasons. . . . . . . . . . 59
Fig. 20: Web interface, tab config system lower part in service mode:
access on system configuration parts. In superuser mode some parameters are
not listed for safety reasons.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Fig. 21: Web interface RS485 configuration panel (service mode): In superuser
mode the upload option for a new telegram format is missing.Please
ask us if you are planning to setup your own telegram file. . . . . . . . . . . . . . . . . . . 60