Lufft CHM 15k Nimbus, Manual

Page: 88 / 101

Annex - Example for querying a complete parameter list
88 Revision R09, November 2016
B Annex
- Example for querying a complete parameter list
A list of available RS485 parameters can be queried using RS485 interface
The following RS485 command queries for a parameter set:
get <RS485No>:Parameters<CR><LF>
The format structure is as following:
<STX><get <RS485No>:Parameters=<ParameterName1>:<TABS><ParameterValue1>
<ParameterName2>:<TABS><ParameterValue2> …
<ParameterNameN>:<TABS><ParameterValueN><CR><LF><EOT>
<RS> is the ASCII character “Record Separator” (HEX 1E), and <TABS> stands for one or more tab
characters (HEX 09). Changing the characters after receiving <LF> or <CR><LF> a clearly arranged
list of all system parameters are generated. The number of tabs are chosen in a way that with a
standard tabulator grid of 8 characters the names of variables and its values are well aligned in
two columns. The DataClient software has a special download option for the parameter file.
Parameter Value
AfdMode: 1
Altitude(m): 36
ApdBreakDown: 368
ApdControlMode: 3
Azimuth: 0.000000
Baud: 5
BaudAfterError: 5
BlowerMode: 0
CHMTest: 0
DateTime: ”10.04.2012 13:55:25”
DeviceName: 16
DeviceType. CHM15k
dt(s): 15
FabName: CHM090104
Gateway: 10.64.102.1
IgnoreChars: 06
Institution: Lufft
IPdhcp: 10.64.102.36
IPAddress: 10.64.102.136
Table 25: Example of the parameter list received via RS485 interface using
the command: “get 16:parameter”.