Lufft CHM 15k Nimbus, Manual

Page: 2 / 101

Dear User
2
Revision R09, November 2016
Note
This Manual is protected by copyright. No part of the Manual may be reproduced in any way
(by photographing, photocopying, microfilm or any other technique) without the prior written
approval of G. Lufft, nor may it be processed, duplicated or disseminated with the help of elec-
tronic systems. Any offence against these rules will be prosecuted.
Proper care was used in compiling this document. No liability will be accepted in the event of
damage resulting from failure to comply with information provided herein.
Documentation number: 8350.MEP
This documentation is valid for the following instrument types:
CHM15k Nimbus series with order numbers: 8350.00, 8350.01, 8350.03, 8350.10
G. Lufft Mess- und Regeltechnik GmbH
Gutenbergstrasse 20
70736 Fellbach / Germany
Phone: +49 (711) 51822-831
Fax:
+49 (711) 51822-944
E-mail: info@lufft.de (Info & Sales)
E-mail: service@lufft.de (Support Lufft Berlin)
Date Revision Comment
March 2014 I0 Firmware 0.723, last Jenoptik release
September 2014 R02
Firmware 0.724, Lufft design, range resolution in NetCDF available,
small corrections
December 2014 R04
Firmware 0.730, cloud algorithm optimized in precipitation cases,
parameter in RS485 / web-interface added, chapter 7-8 corrected
May 2015 R05 Firmware 0.732
October 2015 R06 Firmware 0.735, small fixes
November 2015 R07 Small fixes chapter 9, table SCI
October 2016 R08 Firmware 0.743, all chapter revised
November 2016 R09 small fixes
You are advised to read this manual carefully before you start using the
CHM15k Nimbus ceilometer.
This is necessary to ensure that you will be able to utilize all the capabilities, which have been
designed into the equipment.
This technology is subject to further development.