Lufft CHM 15k Nimbus, Manual

Page: 58 / 101

Communication RS485 & Ethernet
58 Revision R09, November 2016
The configuration panels are accessible for superuser or service engineers. The
different parameters are similar to those described in the sub-sections like in the
RS485 configuration section in chapter 8.1. Before switching on the AFD mode,
Fig. 17: Web interface network configuration panel (service mode). The static IP
address, netmask and gateway can be changed to local network condi-
tions. „RESTART NETWORK“ must be hit to store the settings in the net-
work configuration file and to use the new network settings.
Fig. 18: Web interface: configure network in standard user mode (read only).