Model 3003 and 3003i Multi-Detector Survey Meter / SCA
Section 4
Ludlum Measurements, Inc.
Page 4-15
September 2020
03
(auto log data, user-defined log interval and Location ID)
Use the PRG and ACK/RST buttons to scroll through the available parameter
options.
Location ID
- Upon entry into Location ID, the parameter will be selected
(flashing) indicating the state of the parameter.
01-250 - (Location ID for Mode 3)
Use the PRG and ACK/RST buttons to scroll through the available parameter
options.
Mode 3 Timer
- Upon entry into Location ID, the parameter will be selected
(flashing) indicating the state of the parameter.
1 - 1.8K (number of seconds between data log events)
Use the PRG and ACK/RST buttons to scroll through the available parameter
options.
Page 3 - Configuration
To begin adjusting a device parameter, short press the PRG or ACK/RST to
scroll through the available device parameters. When the appropriate parameter
is selected, short press DETECTOR to select the detector that needs the
parameter adjusted. To begin, short press LOG to begin modifying the
parameter chosen. Finally, extra-long pressing the LOG button will complete
the modification. Default settings are in bold.
Detector Enable
- Upon entry into Detector Enabled, the parameter will be
selected (flashing) indicating the state of the parameter.
on
(detector is enabled)
off
(detector is disabled)
Use the PRG and ACK/RST buttons to scroll through the available parameter
options.
Operation Modes
- Upon entry into Operation Modes, the parameter will be
selected (flashing) indicating the state of the parameter. A picture of the LCD is
below.
