Ludlum Measurements 3003, User Manual

Page: 42 / 89

Model 3003 and 3003i Multi-Detector Survey Meter / SCA
Section 4
Ludlum Measurements, Inc. Page 4-12 September 2020

Unit 1 - DOSE Alarm 3

Unit 1 - Channel
Page 9 - U-3 (if supported)

Unit 3 - RATE/MAX Units and Minimum Display

Unit 3 - RATE/MAX Maximum Display

Unit 3 - RATE/MAX Alarm 1

Unit 3 - RATE/MAX Alarm 2

Unit 3 - RATE/MAX Alarm 3

Unit 3 - COUNT Units and Minimum Display

Unit 3 - COUNT Alarm 1

Unit 3 - COUNT Alarm 2

Unit 3 - COUNT Alarm 3

Unit 3 - DOSE Units and Minimum Display

Unit 3 - DOSE Alarm 1

Unit 3 - DOSE Alarm 2

Unit 3 - DOSE Alarm 3

Unit 3 - Channel
Page 10 - rst

Erase Storage (WARNING!!!)
Page 1 - Device
To begin adjusting a device parameter, short press the PRG or ACK/RST to
scroll through the available device parameters. Next, short press LOG to begin
modifying the parameter chosen. Finally, extra-long pressing the LOG button
will complete the modification. Default settings are in bold.
Multi-level Audio - Upon entry into Multi-level Audio, the parameter will be
selected (flashing) indicating the state of the parameter.

on (audio selection: off/low/med/high)

off (audio selection: off/on)
Use the PRG and ACK/RST buttons to scroll through the available parameter
options.
Backlight Threshold - Upon entry into the Backlight Threshold, the parameter
will be selected (flashing) indicating the state of the parameter.

off (backlight off)