50
Enabled
This will allow use of a floppy drive.
Onboard
FDD
Controller
Disabled
If you do not need a floppy drive, set this item to disabled.
COM ports (Serial Ports)
Values
Meaning
Auto
The bios will automatically use serial ports.
Onboard
serial port 1 /
2
Disabled
If you do not need the serial port in question, set this item to
disabled.
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Set an IO address and an IRQ to be used by serial
ports.
IR Control
Values
Meaning
Standard
This will assign UART 2 to serial port 2, the IR port is disabled.
The two items below can not be changed.
ASKIR
Allows use of the IR port in ASKIR mode.
UART 2 Mode
HPSIR
Allows use of the IR port in ASKIR mode.
Half
Select if your IR device supports Half duplex only.
IR Function
Duplex
Full
For IR devices that support full duplex.
No, No
Will not invert any signal
No, Yes
Will invert the RX signal (Default)
Yes, No
Will invert the TX signal
TX, RX
inverting
enable
Yes, Yes
Will invert both signals
Parallel Port (Printer Port)
Values
Meaning
