53
Select the [Power Management Setup] option from the Main Menu and press [Enter] key.
CMOS SETUP UTILITY Copyright © 1984 – 2001 Award Software
Power Management Setup
ACPI Function
Enabled
Item Help
"
Power Management
Press Enter
ACPI Suspend type
S1(POS)
Menu Level
"
PM controlled by APM
Yes
Video Off Option
Suspend -> Off
Video Off Method
V/H Synch + Blank
Modem Use IRQ
3
SoftOff by Powerbutton
Instant Off
"
Wake UP Events
Press Enter
↑
↓
→
←
: Move Enter: Select PU / PD / + / - : value F10: save ESC: Exit F1: General Help
F5 : Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults
ACPI Function
For a detailed description of ACPI and what it does, refer to the FAQ chapter, ACPI section.
ACPI can be either enabled or disabled on this BIOS Setup page. For the ACPI Suspend
type there are two options:
S1 (POS)
S3 (STR)
STR is the so called Suspend to RAM suspend type. This will save the sytem context all to
RAM and it will shut down the system. The standby voltage of the power supply backs up
the RAM contents. (Therefore we recommend to use a power supply that can support a
current of 1A at the standby line). When the user want the system to wake up again, the
sytem is powered up, the BIOS detects a STR and the system restores itself to where it left
off. Start up time is much faster than a normal boot would take.
Power Management
Pressing [enter] when the power management item is selected will have the following sub
menu appear:
CMOS SETUP UTILITY Copyright © 1984 – 2001 Award Software
Power Management
