4
STOP
WARNING:
DIMM modules that have more than 18 chips are not supported on this
motherboard. (Due to signal integrity)
If the system CPU bus operates at 100MHz/133MHz, use only
PC100-/PC133-compliant DIMMs. (System won’t boot otherwise)
DO NOT attempt to mix PC133 SDRAMs with VCM SDRAMs.
2-3-1 Memory Installation
The DIMM modules can be inserted in DIMM slots 1 to 3. Because of the
two notches in the DIMM module it can be inserted in only one way. Please
refer to the picture below for information on how to insert the DIMM
modules.
STOP
WARNING:
Make sure that you unplug your power supply when adding or removing
memory modules or other system components. Failure to do so may cause
severe damage to both your motherboard and expansion cards
