51
Disable
Disables use of the parallel port.
3BC / IRQ7
378 / IRQ7
On board
Parallel Port
278 / IRQ5
Select an IO Address and an IRQ to be used by the parallel port.
Normal
This is the standard printer port configuration.
EPP
Enables use of EPP devices.
ECP
Enables use of EPP devices.
On board
Parallel Mode
EPP / ECP Enables use of EPP / ECP devices.
ECP mode
use DMA
1 or 3
Select either DMA channel 1 or 3 (This is only relevant if ECP
was selected above). Default is channel 3.
Parallel port
EPP type
EPP1.7 or
EPP1.9
Select the EPP mode. (This is only relevant if EPP was selected
above). Default is EPP1.9.
Legacy Audio
Values
Meaning
Enabled
This will software that requires legacy audio (such as DOS)
games to function properly.
Onboard
Legacy Audio
Disabled
Legacy Audio is disabled.
Enabled
If you added a Sound Blaster or compatible sound card to your
system, the three items below allow specifying details about IO
and IRQ..
Sound Blaster
Disabled
No Sound Blaster (or compatible) cards in the system.
SB IO Base
ADdress
220H –
280H
Specify the IO Base Address for your Sound Blaster card.
Choose from 220, 240, 260 and 280H. Default is 220H.
SB IRQ Select
5,7,9,10
Specify the IRQ for your Sound Blaster card. Default is IRQ 5.
SB DMA
Select
0, 1, 2, 3
Specify the DMA Channel for your Sound Blaster card. The
Default is DMA Channel 1.
MIDI
Values
Meaning
