Specified collar
length
G. LUMINAIRE MOUNTING OPTIONS
SSL-UMP: Compatible with two-gang switch box or 4-square junction box for Dry
/ Damp locations and weatherproof single or two gang box for Wet and concrete
pour locations. Must use provided gasket in Wet locations.
SSL-MP-(Collar Length): For use with single gang weatherproof box for Wet and
concrete pour locations. Must use provided gasket in Wet locations.
1. MOUNTING PLATES - DRY / DAMP, WET AND CONCRETE POUR LOCATIONS
0.63”(16mm)
SSL-UMP
SSL-MP-(Collar Length)
Secure mounting
plate to customer
furnished back box
Collar to finish
flush with finished
substrate
Specified collar
length
SSL-BB
0.63”
(16mm)
SSL-BB: Includes back box, gasket and SSL-UMP mounting plate; features 1/2”
knockouts on top, bottom and back of box.
SSL-BB-(Collar Length): Includes back box, gasket and mounting plate with
specified collar length; features 1/2” knockouts on top, bottom and back of box.
Note:
All unused knockout must be sealed with supplied plugs.
2. BACK BOXES - DRY / DAMP, WET AND CONCRETE POUR LOCATIONS
Collar to finish
flush with finished
substrate
SSL-BB-(Collar Length)
4
Ensure mounting component and wiring is in place before installing substrate.
Minimal tolerances exist between fixture and mounting component, cutout
dimensions are critical. Part numbers & Images depicted through this guide are
applicable of SSL1 & ISL1.
SSL1 & ISL1: 2.40” (62mm)
square cutout
ISL2: 2.40” (62mm) H X
4.10” (104mm) W cutout
SSL1 & ISL1: 2.40” (62mm)
square cutout
ISL2: 2.40” (62mm) H X
4.10” (104mm) W cutout
Gasket
Gasket