background image

 

20 PIECE SOLAR 

MINI LANTERN 

STRING LIGHTS – 

CANADIAN 

 

Model No. 16148 

OVERVIEW

 

This product is designed to the highest technical specifications and 
standards. It will supply years of maintenance free use. Please read 
these instructions thoroughly prior to installation, then store in a 
safe place for future reference. If at any time you are unclear about 
this product, or require further assistance please do not hesitate to 
contact our trained professionals operating the customer support 
line at 1-877-615-1378 Monday to Friday between the hours 8:30 
AM to 5:00 PM Eastern Standard Time or email 
[email protected] 

GETTING STARTED 

Please do not throw away any packing material until all parts are 
verified as present

.

 

ABOUT YOUR SOLAR LIGHT

 

During the day your solar panel will convert the sun's light and/or 
UV rays into electrical power that will charge the rechargeable 
battery.  When it becomes dark, the solar light will turn on using 
the power stored on the rechargeable battery as it will detect no 
day light.  The units light output strength and time depends on how 
many hours and how much sunlight and/or UV rays your panel 
absorbs throughout the day. 
For maximum output place the solar panel in an area where there 
is direct sunlight for at least 8 hours in a given day.  Do not install 
your solar light in a shaded area.  The selected location should not 
be near night time light sources such as; porch lights, street lights 
or pool lights as these may cause the solar light to turn off 
prematurely. 

IMPORTANT 

 

Fully charge the battery before first use. 

 

For best results, locate your solar lamp in a position where it 
can get direct sunlight on the solar panel and generally free 
from cover and shade. 

 

Keep your solar lights away from other night-time light 
sources, such as streetlights. 

 

Make sure the solar panels are not covered by dust, snow and 
debris.  Clean it with a soft damp cloth or paper towel 
periodically.  Avoid the use of abrasive cleaning agents. 

 

Use only rechargeable batteries for your solar lights.  Replace 
with a new battery of the same size each year for optimum 
performance.

 

ASSEMBLY AND OPERATION 

FOR FIRST TIME USE: 

Step 1:(See Figure 1) 
Carefully stretch each of the 
lanterns in order to 
accommodate the plastic 
support and LED.  Secure 
LED into plastic support.  
Insert support into each 
lantern. 
Step 2: Connect (A) solar power station 
to (B) garden stake (Figure 2).                                                                       
Step 3: Fully charge the battery before 
first use. Charge under direct sunlight 
in the <OFF> position for 2 days. 
Step 4: For daily operation, place the 
ON/OFF switch in the <ON> position 
under the unit (Figure 3).  Your solar 
light will automatically turn on once it  
gets dark. 

CHANGING THE BATTERY 

Step 1: Push the switch to the <OFF> position 
(Figure 3).                                                                    
Step 2: Remove the screws from the battery cover  
(Figure 4). 
Step 3:

 

Carefully lift the cover to access the battery 

compartment, being sure not to detach any of the  
connected wires. 
Step 4: Replace the battery with an equivalent 
new solar rechargeable battery; ensuring the 
correct polarity is observed (Figure 5). 
Step 5: Reassemble the unit by reversing the 
above procedure. 

Caution: Rechargeable batteries contain Nickel-Cadmium or Nickel-
Metal Hydride and must be recycled or disposed of properly. Do not 

mix old and new batteries. Do not mix alkaline, standard (carbon-

zinc), or rechargeable batteries. Do not dispose of batteries in fire. 

Batteries may explode or leak. 

TROUBLE SHOOTING TIPS 

If your solar light does not come on at dusk despite following all 
instructions please try the following steps: 
1. Make sure that the solar light is not affected by any other light 
source. 
2. Ensure the solar light does not stand in the shade all day. 
3. Check to see if the batteries are installed correctly. 
4. If there is a protective film on the solar panel remove it.

 

CARE INFORMATION 

1. Clean any dirt and debris from the solar panel.  The panel cannot 
recharge if the light is obstructed.  Use a soft cloth to clean the 
panel. Do not use abrasives or chemicals that might scratch or 
damage the UV coating. 
2. In a region where snow and ice are likely and the light assembly 
is covered with snow for an extended period of time the batteries 
will require a recharge for at least 8 hours.

 

1-YEAR LIMITED PRODUCT WARRANTY 

This product is covered under a one year limited warranty. Fusion 
Products Ltd. warrants to the original purchaser that this product 
is free from defects in materials and workmanship for the period 
of one year warranty from date of purchase. 

For Technical Support and/or Warranty inquiries please 

contact: Fusion Products Ltd.  

Monday to Friday 

8:30-5:00 PM EST 

2905 Argentia Road, Unit 2,3 

Mississauga, Ontario L5N 8G6 

Tel: 1-877-615-1378  

Fax: (905) 812-3256 

Email: [email protected] 

Figure 3 

Figure 4  

Figure 5  

Figure 2  

Figure 1 

Reviews: