SERVICING PS-RMT
L.
STEP 1
STEP 2
STEP 3
With lid removed, disconnect line/mains,
load and control wiring from driver.
Remove power supply retaining clamps/
screws/nuts as apply.
STEP 4
Remove and replace driver assembly
(
Fig.5).
STEP 5
Secure with retaining clamps/screws/
nuts.
STEP 6
Reattach lines/mains, load and control
wiring with suitable connectors. See
Section M.
STEP 7
Re-install lid on enclosure (
Fig.4).
Fig.4
Remove screws securing lid to enclosure
(
Fig.4).
Fig.5
12
