Lucent Technologies STGR-LIM-VD-24, Manual

Page: 39 / 102

Rate-adaptive mode parameters The AL-DMT subprofiles
............................................................................................................................................................................................................................................................
363-217-032R9.9.0
Issue 2, Mrach 2006
3 - 9
Parameter descriptions
Parameter Setting
rate-adapt-mode-up
Specifies the rate-adaptive mode for upstream and
downstream training. Valid settings are:
automatic-at-startup
—Specifies that the rate is
selected during the startup process, based on the settings of the
margin-config
subprofile.
operator-controlled
—Specifies a fixed rate to
which the port trains, if the settings in the
margin-
config
subprofile are satisfied.
rate-adapt-mode-down
Not used—This is controlled by the setting of the
rate-
adapt-mode-up
parameter.
rate-adapt-ratio-up
Not currently supported on the VDSL LIM. Specifies the
percentage ratio for distributing excess upstream bit rate
among the fast and interleaved channels when the
rate-
adapt-mode
is set to
automatic-at-startup
. Valid
settings are 0-100 in increments of 10. See “Configuring rate
adaptation” (p. 3-13) .
rate-adapt-ratio-down
Not currently supported on the VDSL LIM. Ratio for
distributing excess upstream bit rate among the fast and
interleaved channels when dual latency is supported.