Lucent Technologies STGR-LIM-VD-24, Manual

Page: 46 / 102

............................................................................................................................................................................................................................................................
Bit rate parameters The AL-DMT subprofiles
3 - 1 6 363-217-032R9.9.0
Issue 2, Mrach 2006
............................................................................................................................................................................................................................................................
Bit rate parameters
Introduction
The
al-dmt:interleave-path-config
subprofile, bit rate parameter settings are
configured to control the use of the interleave path channel for both upstream and
downstream ADSL traffic.
Default settings
[in AL-DMT/{ any-shelf any-slot 0 }:interleave-path-config]
min-bitrate-up = 128
min-bitrate-down = 128
max-bitrate-up = 1024
max-bitrate-down = 8000
planned-bitrate-up = 1024
planned-bitrate-down = 8000
Parameter descriptions
Parameter Setting
min-bitrate-up
Specifies the minimum bit rate for upstream traffic, from
0Kbps through 2016Kbps.
The default value is 128Kbps.
Important! Not valid for the rate adaptation setting of
operator-controlled .
min-bitrate-down
Specifies the minimum bit rate for downstream traffic. The
valid settings are:
0Kbps through 18016Kbps
0Kbps through 24544Kbps
The default value is 128Kbps.
Important! Not valid for the rate adaptation setting of
operator-controlled .
max-bitrate-up
Specifies the maximum bit rate for upstream traffic, from
0Kbps through 2016Kbps.
The default value is 128Kbps.
Important! Not valid for the rate adaptation setting of
operator-controlled .