manualshive.com logo in svg

Lucent Technologies Definity Audix System, Installation And Upgrade, Page: 110 / 208

Share
Download
Lucent Technologies Definity Audix System Installation And Upgrade Download Page 110

Acceptance Checks

4-14

 Issue  2  December 1996

The system responds with the  Tape Test Results screen.

3. Press the 

 (F3) function key to begin the test. The test takes from 3 

to 5 minutes to complete. If it does not complete successfully, refer to 

DEFINITY AUDIX System — Maintenance

, 585-300-110. If it does pass, 

proceed to Task 24: Test Local Area Network, if:

■

 AUDIX server hardware options have been purchased (Task 13: 
Activate DEFINITY AUDIX Server Hardware Options)

■

 The DEFINITY AUDIX system has been upgraded with a TN2170 
Alarm Board and a three-way splitter cable (See Upgrade 
Instructions, Chapter 7, ‘‘Upgrades to R3.2’’

,

 and Task 6: Connect 

the Alarm Board Cable, respectively.)

■

IMAPI system parameters have been activated (Task 13: Activate 
DEFINITY AUDIX Server Hardware Options). 

Otherwise, go to Task 25: Clear Administration, Error, and Alarm Logs.

ENTER

Summary of Contents for Definity Audix System

















































































































































































































Reviews:

No comments