Lucent Technologies Definity Audix System, Installation And Upgrade, Page: 111 / 208

Task 24: Test Local Area Network
Issue 2 December 1996
4-15
Task 24: Test Local Area Network
If possible, Task 24: Test Local Area Network and Task 25: Clear Administration,
Error, and Alarm Logs are done jointly with the customer’s LAN system
administrator.
Prior to activating and installing the LAN options that will allow I
NTUITY
Message
Manager to work, the LAN administrator must do one of the following:
— Add the AUDIX host name to the network domain name server.
— Create a host file on each PC, typically under the \net\tcp\hosts directory.
— Neither of the above if you are using the numeric IP address.
AUDIX Server Acceptance Tests are limited to performing internal diagnostics of
the server to the Lucent -provided demarcation point. If a customer
representative is available, Joint Acceptance Testing will include a test of the
customer’s server, another AUDIX Server or a PC with or without I
NTUITY
Message
Manager.
NOTE:
If the LAN administrator is not present for joint acceptance testing, the
installation and testing is considered complete at this time.
When this is done, proceed with the following steps.
1. With the cursor on the DEFINITY AUDIX command line, type test lan and
press . The system responds with the following screen.
RETURN