Task 14: Perform Initial DEFINITY AUDIX Administration
Issue 2 December 1996
3-23
Task 14H: Run the Switch Translations Audit
a Second Time
This task is required for all installation scenarios.
You must run the Switch Translations audit a second time to update the DEFINITY
AUDIX system processes again with the new information you have administered.
1. With the cursor on the DEFINITY AUDIX command line, type audit
switch-translations and press
.
The system displays the Audit Results screen.
2. Press the
(F3) function key to begin the audit.
3. When the audit is complete (in a few seconds) proceed to Subtask 14I. If
the audit does not complete successfully, see
DEFINITY AUDIX
System — Maintenance
, 585-300-110.
Task 14I: Assign the Time Zone
This task is required for all installation scenarios.
Use the information on Worksheet C-6,
Assign the Time Zone
, to perform this
task.
1. With the cursor on the DEFINITY AUDIX command line, type change
switch-time-zone and press
.
RETURN
ENTER
RETURN
Summary of Contents for Definity Audix System
Page 14: ...About This Document xiv Issue 2 December 1996...
Page 22: ...Prerequisites 1 8 Issue 2 December 1996...
Page 96: ...Initial System Administration 3 38 Issue 2 December 1996...
Page 170: ...Option Settings B 20 Issue 2 December 1996...
