Lucent Technologies Cajun P220, Operation Manual

Page: 85 / 335

Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
Cajun P550/P220 Switch Operation Guide 3 - 39
b. Set the date on which Summer Time Hours start and end by selecting the
Month, Day, and Year on which Summer Time Hours start and end.
c. Enter values for the Hour and Minutes when Summer Time Hours start and
end.
8. Click APPLY to save your changes, or CANCEL to restore previous settings.
Setting the System Clock
The system clock is used for setting traps, alarms, and other events of the switch. Set
SNTP and Summer Time Hours before you set the system clock.
To set the system clock:
1. In the System Information section of the Web Agent window, click System
Clock . The System Clock dialog box opens.
2. In the Current Time Setting fields, enter the time using 24-hour time format (for
example, 10 p.m. is 22 00 00).
3. From the Time Zone pull-down menu, select your time zone .
4. In the Current Date Setting fields, enter the current month , date , and year .
5. Click APPLY to save your changes, or CANCEL to restore previous settings.
Note: The system clock does not automatically change with Daylight Savings Time.
Setting the Temperature System
You can set the upper and lower temperature warning systems for your switch’s
backplane and slot 1.
To configure the temperature warning systems:
1. In the System Information section of the Web Agent window, click
Temperature . The Temperature System dialog box opens.
2. Enter the desired temperature warnings for the switch backplane and slot 1
sensors . For Layer 3 switches, also enter the desired temperature warning for the
CPU sensor .
3. Click on APPLY to save your changes, or Defaults to restore the temperature
defaults.