Lucent Technologies Cajun P220, Operation Manual

Page: 117 / 335

Configuring IPX RIP Protocol (Layer 3)
Cajun P550/P220 Switch Operation Guide 5-5
g. In the Ticks and Hops fields, enter 0 , respectively.
This filter ensures that the advertising of network 10 on the interface Backbone will not
be suppressed. To suppress all other networks, proceed with the creation of Filter 2.
Filter 2
1. In the IPX RIP Configuration section of the Web Agent window, click Filters .
2. Click Create to create a new filter. The Add IPX RIP Filter dialog box opens.
3. Configure the following parameters:
a. From the Interface pull-down menu, select the Backbone .
b. In the Precedence field, enter 1 .
c. In the Start Network field, enter 0 .
d. In the End Network field, enter ffffffff .
e. From the Direction pull-down menu, select Outbound .
f. From the Filter/Suppress pull-down menu, select Enable .
g. In the Ticks and Hops fields, enter 0 , respectively.
4. Click CREATE to save your changes, or CANCEL to restore previous settings.
This filter ensures that the advertising of all networks on the interface Backbone will be
suppressed.
Together, Filter 1 and Filter 2 will act to suppress all network advertising with the
exception of network 10. It is important to note that Filter 2 had the Precedence field set
to 1 and Filter 1 had the Precedence field set to 0. Any filter with a Precedence of 0 will
always override a filter with a precedence of 1 or higher.
Interpreting IPX RIP Interface Statistics
To interpret IPX RIP interface statistics:
1. In the IPX RIP Display section of the Web Agent window, click Interface
Statistics . The IPX RIP Interface Statistics dialog box opens.