Lucent Technologies Cajun P220, Operation Manual

Page: 271 / 335

Monitoring the Cajun Switch (Layer 2 & Layer 3)
Cajun P550/P220 Switch Operation Guide 16-5
6. Use Table 16-3 to configure your protocol event log settings:
7. Click APPLY to save your changes, or CANCEL to restore previous settings.
Viewing the Event and Shutdown Logs
To view the Event and Shutdown logs:
1. In the Event Subsystem section of the Web Agent window, click either Event
Log or Shutdown Log . An Event or Shutdown Log Search dialog box opens.
2. In the Search By: column, click the Severity Level checkbox.
3. From the Severity Level pull-down menu, select the severity level to filter on a
particular severity level for events.
4. From the Event Type pull-down menu, select an event to filter on a particular
Event Type. The selected event log entries open in the Event Log dialog box.
5. Use Table 16-4 for a description of the entries in the event and shutdown logs:
Table 16-3. Protocol Event Log Settings
Parameter Enables or disables the logging of...
Fault Serious errors that can cause a system crash, for example,
panic.
Error Serious errors that will not cause a system crash but can
contribute protocol problems.
Warning Non-critical errors.
Info Event details.
Trace RIP and OSPF packet tracing.
Debug Event messages used to troubleshoot a network problem.
Table 16-4. Event and Shutdown Log Entries
Entry Definition
Log ID Displays the number of this event in the log FIFO (First In First
Out).
Event ID Displays an index that identifies the event class.
Time Stamp Displays the date and time the event was recorded in the log.