Lucent Technologies Cajun P220, Operation Manual

Page: 138 / 335

Configuring IP Routing (Layer 3)
7-12 Cajun P550/P220 Switch Operation Guide
3. In the Access List Name field, enter a number between 100 and 199 to identify
your new access control list.
4. In the Access Rule Index field, enter a number to identify the access rule.
5. From the Access Type pull-down menu, select Filter .
6. In the Source Address field, enter an * (asterisk) for the source address.
7. In the Dest Address field, enter an IP address that represents the destination
address of the Web server.
8. In the TCP/UDP Destination Port field:
• Enter a Min . of 0 (HTTP).
• Enter a Max. of 80 (HTTP).
9. In the TCP/UDP Source Port field:
• Enter a Min . of 0 (HTTP).
• Enter a Max. of 80 (HTTP).
10. Select TCP Established . A check mark displays in the check box.
11. Click CREATE to save your changes, or CANCEL to restore previous settings.
Each time an end user attempts to access the corporate Web server specified by the
source and destination TCP/UDP ports, all Web requests are filtered.
Example: Filtering Traffic Between Subnets
It is possible to filter traffic to either a specific address or to an entire subnet. In this
example, all traffic between the two subnets is filtered:
❒
10.1.1.0
❒
10.1.2.0
This example also assumes that the network is a Class C network (255.255.255.0).
To filter traffic between both subnets, you must create two access rules.
To create the access rules:
1. In the IP Configuration section of the Web Agent window, click Access Lists .
The IP Access List dialog box opens.
2. Click Create Extended . The IP Extended Access Rule Creation dialog box opens.
3. In the Access List Name field, enter a number between 100 and 199 to identify
your new access control list.
4. In the Access Rule Index field, enter a number to identify the access rule.