Lucent Technologies Cajun P220, Operation Manual

Page: 288 / 335

Downloading New Operational Code to the Switch (Layer 2 & Layer 3)
18 - 4 Cajun P550/P220 Switch Operation Guide
Selecting the Image for Reboot
To view and power up the downloaded image from the Web Agent:
1. In the Memory Subsystems section, click FEPROM Contents . The FEPROM
dialog box opens.
2. In the Power Up/Reset Image pull-down menu, select the APP location into
which you downloaded version 4.0 and click APPLY .
To set the location from which you download the software through the command line,
enter the following command at the system prompt on version 3.0 or 3.1:
fep set <APPname>
where
<APPname>
is the APP location in flash memory on the switch that contains the
new image.
Resetting the Switch
To reset the switch through the Web Agent after downloading version 4.0:
1. In the System Information section of the Web Agent, click System Reset .
2. In response to the question, Do you want to reset the switch? click Yes .
The switch resets with the selected version.
To reset the switch through the command line interface after downloading version 4.0:
1. At the system prompt, enter the following command:
reset
2. In response to the question, Are you sure you want to continue? enter Y .
The switch resets with the selected version.