Installation Instructions
4|
P a g e
v 1 . 0
Efficient, Cost Effective Electric Heating
The innovative design of the THERMASTRIP enables comfortable and even heat dispersion from the surface with minimal
operating costs.
Design flexibility
Four THERMASTRIP models are available, ensuring the heating requirements of any undercover outdoor or open indoor area is
possible. Brackets for direct ceiling or wall/ceiling angled mounting are supplied as standard.
Optional THERMASTRIP accessories include beam and extension mount brackets.
Minimal maintenance
The THERMASTRIP incorporates no internal moving parts ensuring quiet and virtually maintenance free operation.
Australian made
Designed, engineered and assembled in Australia the THERMASTRIP, is fully backed by a 24 month warranty.
Stylish design
— The Heater that is a Design Feature!
The attractive THERMASTRIP comes with a standard black face and anodised alloy rear casing.
Easy to use
The standard THERMASTRIP is controlled by a simple on/off operation, either when plugged directly into a power point, or
hard-wired via a wall mounted on/off switch. The unit takes approximately 15 minutes to heat up to the maximum temperature and
approximately 30 minutes to cool down, depending upon the ambient temperature. Please don’t forget to turn it off.
We recommend installing your THERMASTRIP with a timer controller to ensure the unit is turned off after a pre-set time.
THERMASTRIP recommends SKU 200064 controller (not included), which includes a timer function and temperature control.
