Installation Instructions
19|
P a g e
v 1 . 0
Heater Wiring Schematic Diagrams
The THERMASTRIP heater is required to be fitted with an isolation switch. For units with a plug (200060, 200061, 200062), they can
be installed into a mains power socket outlet. Check the installation location in the ceiling has access to a socket outlet which is
connected to a wall switch. If it does not please contact a licensed electrician to arrange installation of the socket outlet, wall switch
and isolation switch. It is recommended to use SKU 200064 (not included) Wall Controller for maximum performance and control
options. Ensure the unit is turned OFF after every use.
For direct wiring to the controller, the maximum is one heater un
it unless it is two of SKU’s 200060.
For multiple units from one wall controller it is recommended to talk your electrician who will use a relay or contactor.
