0940-1_M+B-PutentraenkeGB
LUBING Floor Watering System
- 16 -
3.9 Fitting the drinking line
Overview on page 10, section 2 - 6
LUBING drinking lines comprise pre-assembled elements 3 metres in length, the
Pressure Regulator and Breather Unit.
Suspension units, ropes with adjusting and retaining panels, ceiling pulleys and
hooks are used for suspending the drinking line.
The drinking line is adjusted in height via traction ropes, guide pulleys and
handwinches.
The handwinches are secured at the front in the case of short houses.
In the case of long houses (100 - 150 metres), ceiling winches are used in the centre
of the house.
If you have not installed a Main Water Supply as described in 3.5, please observe the
following:
A water filter must be fitted in any case!
The water supply line via the wall or ceiling should be at least ¾“ in diameter.
The individual supply line from the ceiling to the Pressure Regulators is laid as a ½“
pressure hose (fibrous).
If using a proportioning unit, we recommend the LUBING Mixer.
Please assemble as follows:
Overview on page 10, section 5
1. Measure the width of the house, specify the position of the drinking line and
sketch it on the front and back walls of the building. The number of drinking lines
per building is specified in the layout.
2. Calculate the length of the drinking line and determine the distance between it
and the front and back walls.
3. Specify and screw in the first (1) and last (5) ceiling
hook for each row
4. Secure a string between the two ceiling hooks (1) and (5).
5. Screw in all of the ceiling hooks (4) approx. 3 metres
apart and on alternating sides of the string. They
should be approx. 20 cm away from the string.
Position another ceiling hook 20 cm from the string
and opposite the second ceiling hook (2).
