Top climate system
with LUBING Touch Controller
Copyright © Lubing System - All rights reserved
11
2.8 Safety devices and guards
– Before switc
hing on the system always make sure that all safety devices and guards have been fitted properly
and are functional.
–
When subcomponents are delivered the plant operator must ensure that the guards are fitted according to
the rules.
– You must not bypass or remove safety devices and guards or defeat them in any other way.
– Check the functioning of all the system‘s safety devices regularly.
2.9 Obligations of the plant operator
The system is used in industrial plants. The plant operator is therefore subject to the legal requirements concerning
health and safety at work.
In addition to the safety information in these manual it is necessary to comply with the safety, accident prevention
and environmental protection regulations valid for the area of application, where the system is being used. The
following applies in particular:
– the plant operator must ensure that the system is used as intended (see chapter 2.4 “Intended use“)
– the plant operator must always keep the manual in a legible and complete condition at the place where the
system is used.
– throughout the time that the system is in use the plant operator must check that the plant instructions are in
line with official regulations and must update them if necessary.
–
the plant operator must only let suitably qualified and authorized personnel work on the system.
– the plant operator must ensure that all personnel working on or with the system have read and understood
this operators manual. The plant operator must also train the personnel and inform them about hazards at
regular intervals.
–
the plant operator must provide sufficient lighting at the control points of the system in accordance with local
health and safety regulations.
– the plant operator must make sure that individuals whose reactivity is impaired by drugs, alcohol, medication
and the like do not work on the system.
In addition, the plant operator is responsible for keeping the system in a perfect technical condition so the following
also applies:
– the plant operator must regularly check that all safety devices are functioning correctly and are complete.
2.10 Personnel requirements
The device is only allowed to be operated, maintained and repaired by persons who have been trained for this and
are authorized to do so. These persons must know the installation instructions and operators manual and act in
accordance with them. The respective authorizations for personnel must be defined clearly.
2.10.1 Responsibilities
Personnel require the following qualifications for the various activities
:
Personnel requiring training
Personnel requiring training, such as trainees or temporary workers, are not aware of all hazards that operation
of the system can entail. They are only allowed to work on the system under the supervision of skilled personnel.
Instructed personnel
Instructed personnel have been instructed by the plant operator about their tasks and the potential risks of
inappropriate behavior.
Skilled personnel
Skilled personnel are able to do their work and recognize/avoid potential hazards on their own as a result of their
training, knowledge and experience and their familiarity with regulations.
Electrical specialists
Electrical specialists are able to work on electrical equipment and recognize/avoid potential hazards on their own
as a result of their training, knowledge and experience and their familiarity with standards and regulations. Electrical
specialists have been trained for their specific point of deployment and know the relevant standards and regulations.
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
