background image

5.  Click the direction arrow to control the camera. 

(1) Click up/down direction button to select the 

item. 

(2) Click Iris + to confirm the selection. 
(3) Click left/right direction button to adjust the 

value of the selected item. 

3.1 FORMAT

 

PAL (Phase Alternating Lines)

 

PAL is a color encoding system for analog television 
used in broadcast television systems in most countries. 
NTSC: (National Television System Committee) 
NTSC is the analog television system that is used in 

most of North America, parts of South America, 

Myanmar, South Korea, etc. 

3.2 LANGUAGE 

Supports English, and Chinese. 

3.3 MAIN MENU 

3.3.1 AE (AUTO EXPOSURE) 
Auto Exposure describes the brightness-related 

parameters, which can be adjusted by BRIGHTNESS
EXPOSURE MODEAGC, and SENSE UP

EXPOSURE

 BRIGHTNESS                             
 EXPOSURE MODE                  
 AGC         
 SENSE UP                                           
 RETURN           

5
GLOBAL
MIDDLE
0

Figure 3-3 AE 

BRIGHTNESS 
Brightness refers to the brightness of the image.

 

You can set the brightness value from 1 to 10 to darken 

or brighten the image. The higher the value, the

 

brighter the image is.

 

EXPOSURE MODE 
You can set the EXPOSURE MODE as GLOBALBLC, and 
WDR

GLOBAL 

GLOBAL refers to the normal exposure mode which 

adjusts lighting distribution, variations, and 
non-standard processing. 

BLC (Backlight Compensation) 

BLC (Backlight Compensation) compensates light to the 

object in the front to make it clear, but this may cause 
the over-exposure of the background where the light is 
strong. 

When BLC is selected as the exposure mode, the BLC 
level can be adjusted from 0 to 8. 

WDR (Wide Dynamic Range) 

The wide dynamic range helps the camera provide clear 

images even under backlight circumstances. WDR 
balances the brightness level of the whole image and 
provides clear images with details. 
AGC (Auto Gain Control) 
It optimizes the clarity of the image in poor light 
conditions. The GAIN level can be set as HIGHMIDDLE
or LOW. Select OFF to disable the GAIN function. 

Note: 

The noise will be amplified when the GAIN is on. 

                    Available from A1 Security Cameras 

    www.a1securitycameras.com email: [email protected]

Summary of Contents for CMHT1722WE-28















Reviews: