60
6.7
FAQs on 4G MMS Function
The camera stops sending MMS to the pre-set mobile
number suddenly:
Please check if the SIM card balance is
enough and local signal is well, if the operator sets limits to the
number of MMS sending or if the mobile number was
blacklisted.
It takes so long to receive MMS picture or cannot receive:
The signal is too weak or the batteries is near to be ran out.
Set the camera to have burst shooting, but some pictures
were not sent:
The camera is able to send MMS constantly,
but if the signal is too weak, it may not work stably.
Receive partial image or some is incomplete:
The camera
was in motion when sending pictures. Or the signal was
unstable. Besides, the SD card may be damaged.
6.8
Low Battery Alert
The camera shows the battery level on each MMS picture. When the battery
level is high, a code B3 shows on the bottom left corner of the image. After
the battery level drops, the code changes to B2. When the battery level gets
very low, the code changes to B1, which means it’s time to change the
batteries. So you can decide when to change batteries.
Summary of Contents for Ltl-6511-4G
