47
4G communication of Ltl-6511-4G is working with below conditions:
Camera switch is in On mode and camera is functioning well. SD card
has enough storable capacity. Correct installation and enough power of
batteries. MMS sending by timing or triggering should be workable in
Camera mode or Cam+ Video mode only, not in Video mode. When the
camera is performing the remote control, MMS sending is workable in
Camera, Video and Cam+ Video mode by sending SMS command code
60 to the module.
The SIM card supports 4G LTE has been installed. SMS, MMS and data
traffic service are activated (some MMS services need pre-paid balance
in the account).The SIM card is not password-protected.
The signal is sufficiently strong in the field.
The SMS sending number should be the same with the phone number
set on camera, or the camera will not accept the command.
MMS/email parameters and email password should be correct.
If you have the Timer on, please make sure the specified time of timer is
in the period of MMS sending.
Make sure the 4G Send Options is not
closed for sending MMS picture.
49 indicates the
number of the picture is taken per day, 00 indicates no limit. You can
choose other number for the limitation of MMS sending. If the daily limit
has been reached, you can reset it on PC or external button control box
with display screen, or wait the camera to count it from 1 at next day.
The camera is stationary while working.
Summary of Contents for Ltl-6511-4G
