37
You can set the camera parameters and 4G working status in this interface,
please refer to
3.1
Set up Parameters on Camera
and
3.12
SMS Remote
Control & Table of Command Code.
Click
to tick the circle in the left side, tick means the
setting need to be generated to SMS command and send; blank circle
means unselected, which will not generate menu settings to SMS command
and send after setting Click
after finishing setting, generate the
setting menu content to mobile SMS command, send to the SIM card
number on camera directly for remote control.
Attention: When sending SMS command to control camera on mobile
setup software, please make sure the camera is in ON mode, MMS
module is working well and SIM card number in camera is filled,eg:
Summary of Contents for Ltl-6511-4G
