Ltl Acorn Ltl-6511-4G, User Manual

Page: 44 / 74

41
The camera configuration files generated by iPhone version software can be
seen when open folder Documents/Ltl Acorn in this interface.
3.12
SMS Remote Control & Table of Command Code
In order to communicate well with your camera via text message/SMS,
format your texts and send in a certain way is needed. Or please download
the mobile APP to send command, it would be easier.

All the SMS commands should start with “LTL(ltl)” and end with
“AA(aa)”.

Between “ltl” and “aa”, insert the specific commands you want the
camera to perform. You can choose one command at a time, but it
saves time to combine commands to send together.

A specific command is made up with four parts in the following
sequence: a two-digit command code, an asterisk (*), a code value (a
number or a combination of number and letter), and lastly a pound/hash
sign (#).

Both capitalized and non-capitalized letters can be used in a same
command.

Do NOT leave any spaces between any of the letters and symbols.

Do NOT put a comma or period in the command. Do NOT include any
quotation marks in a command; they are used here just for explanation
purposes.

The maximum for text messages is 60 bytes. If you want to send
multiple commands, please do so in separate texts to avoid failure
sending.
An example of a command: LTL01*0#02*2#06*S30#07*10A3Z#60*1#AA
It means to ask the camera to 1) be in camera mode and take only pictures,
2) set image size to 2MP, 3) take pictures with an interval of 30 seconds, 4)
turn on serial number and set it to “0A3Z”, and 5) immediately take a picture
and send it to you.

For SMS remote control interval, different value with different