Zhengzhou Linghang Robot Co.,Ltd
2
Sensor plate
seals the pneumatic chamber and provides mounting points for the
Lock/Unlock switches.
Tool Plate
The half of the Tool Changer to which various tools or end-effector
are mounted.
Tool stand
Stand that holds Tools not being used by the robot. This is usually
supplied by the customer and is specific to the application.
Unlock port
The master plate unlocks the port of the air supply circuit to drive
the master plate to be separated from the tool plate.
Arc
Prevention
makes it possible to couple/uncouple without switching off electrical
module power. Arcing can damage and shorten the life of the
electrical power contacts. Arc Prevention extends the life of all
electrical power contacts by eliminating arcing caused by inductive
loads and high inrush current during coupling/uncoupling.
Coupling
Lock
Discrete
Refers specifically to modules that pass discrete signals and/or
power from Master to Tool. The number of discrete pass-through
signals is limited by either the number of pins on the connector or
the number of pins at the pin block interface between Master and
Tool. Some Discrete modules also provide the user the ability to
control the Tool Changer by providing “Latch” and “Unlatch” signals
to an integrated valve that locks and unlocks the Tool Changer. The
Tool Changer Locked, Unlocked, Ready-to-Lock, and TSI switch
signals can also be provided to the user, these discrete modules
are referred to as Discrete Control/Signal Module.
Ethernet
Switch
An Ethernet network component connecting multiple
communication partners with each other
Fieldbus
A generic term referring to any one of a number of industrial
computer networking standards. Examples include: CAN, Modbus,
and PROFINET.
Gigabit
Ethernet
The interface that can realize 1000mdps transmission rate by CAT6
standard
