Zhengzhou Linghang Robot Co.,Ltd
6
1.3 Safety notes:
Warning: do not maintain or repair the tool changer or module
，
Unless the tool is safely supported or placed on the tool stand
，
All
energized circuits (such as electrical, air, water, etc.) have been
closed, the high-voltage connection has been cleaned, and the power supply has
been discharged from the circuit in accordance with the customer's safe operation
procedures and policies.Personal injury or equipment damage may result if not
placed in the tool holder and the circuit is energized. Place the tool on the tool
holder, close and discharge all energized circuits, release all pressurized
connections, and confirm that all circuits are powered off before maintaining or
repairing the tool changer or module.
Warning: during operation, the area between the master plate and
the tool plate must be kept clean. If the area is not kept clean, the
tool changer, module or arm end tool will be damaged and
personal injury may be caused.
Warning: the tool changer is only used for the intended application
and the application approved by the manufacturer. Using the tool
changer in unexpected use will cause damage to the tool changer,
module or arm end tool, and may cause personal injury.
