LT Security FA16CH User Manual Download

Page: 89 / 192

User Manual of Digital Video Recorder

Figure 6. 19

System Log Search Interface

Click

Log Search

tab to enter Playback by System Logs.

Set search time and type and click

Search

button.

Figure 6. 20

Result of System Log Search

Choose a log with record file and click

button to enter Playback interface.

Note:

If there is no record file at the time point of the log, the message box “No result found” will pop up.

Playback management.

The toolbar in the bottom part of Playback interface can be used to control playing process.

are for reference only and may or may not be entirely up to date or accurate based upon the version or models.

Product names mentioned herein may be the unregistered and/or registered trademarks of their respective owners.

Summary of Contents for FA16CH

































































































































































































Search results

Summary of Contents for FA16CH

Reviews:

Related manuals for FA16CH

Brands by name

Popular brands

LT Security FA16CH, User Manual

Search results

Summary of Contents for FA16CH

Reviews:

Related manuals for FA16CH

Brands by name

Popular brands