manualshive.com logo in svg

LT Security FA16CH, User Manual, Page: 178 / 192

Share
Download
LT Security FA16CH User Manual Download Page 178

User Manual of Digital Video Recorder 

 

178 

13.1

 

Configuring RS-232 Serial Port 

Purpose: 

The RS-232 port can be used in two ways: 

Parameters Configuration:

 Connect a PC to the device through the PC serial port. Device parameters can be 

configured by using software such as HyperTerminal. The serial port parameters must be the same as the device‟s 
when connecting with the PC serial port. 

Transparent Channel: 

Connect a serial device directly to the device. The serial device will be controlled 

remotely by the PC through the network. 

Note:

 

RS-232 serial port is available for 16ch-ST and 24/32ch-FA series. 

Steps: 

1.

 

Enter the RS-232 Settings interface.

 

Menu > Configuration > RS-232

 

 

Figure 1. 1

 

RS-232 Settings Interface

 

 

2.

 

Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control and usage. 

3.

 

Click 

Apply 

to save the settings. 

©2015 LT Security, Inc. All Rights Reserved. White papers, data sheets, quick start guides, and/or user manuals 

are for reference only and may or may not be entirely up to date or accurate based upon the version or models. 

Product names mentioned herein may be the unregistered and/or registered trademarks of their respective owners. 

Summary of Contents for FA16CH

































































































































































































Reviews:

No comments