LT Security FA16CH User Manual Download Page 76

Page: 76 / 192

User Manual of Digital Video Recorder

Figure 5. 37

Unlocking Attention

Protect file by setting HDD property to Read-only

Before you start:

To edit HDD property, you need to set the storage mode of the HDD to Group. See

Chapter 10.4 Managing

HDD Group.

Steps:

Enter HDD setting interface.

Menu> HDD

Figure 5. 38

HDD General

Click

to edit the HDD you want to protect.

Figure 5. 39

HDD General- Editing

Set the HDD to Read-only.

Click

to save settings and back to the upper level menu.

Notes:



You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the
property to R/W.



If there is only one HDD and is set to Read-only, the DVR cannot record any files. Only live view mode
is available.



If you set the HDD to Read-only when the DVR is saving files in it, then the file will be saved in next
R/W HDD. If there is only one HDD, the recording will be stopped.

are for reference only and may or may not be entirely up to date or accurate based upon the version or models.

Product names mentioned herein may be the unregistered and/or registered trademarks of their respective owners.

Summary of Contents for FA16CH

































































































































































































Search results

Summary of Contents for FA16CH

Reviews:

LT Security FA16CH, User Manual, Page: 76 / 192

Search results

Summary of Contents for FA16CH

Reviews: