LSS MasterPort 2, Manual

Page: 50 / 68

MasterPort 2
50
Selection Meaning
Sendecheck-
summe Setting to calculate the checksum of transmitted UDP packets
On
Enables checksum
Off Disabled checksum
Empfangscheck-
summe Setting to calculate the checksum of received UDP packets
On
Enables checksum
Off Disabled checksum
Set Ethernet me-
dia Setting the transmission rate
Autonegotiation:
Enables automatic detection of transmission rate
Set network
Parameters:
Set speed and direction parameters manually
10 Half Enables 10MBit/s Half Duplex
10 Full Enables 10MBit/s Full Duplex
100 Half Enables 100MBit/s Half Duplex
100 Full Enables 100MBit/s Full Duplex
Direction control Half Duplex Enables half duplex
Full Duplex: Enables full duplex
Network Speed 10 MBit Enables 10MBit/s
100 MBit Enables 100MBit/s
Selection Meaning
Name Setting the Art-Net short name for naming the MasterPort 2 , eg Location "backstage"
sACN
Draft Setting the supported version of sACN
Off
MasterPort 2 sends sACN according to E1.31 2009
On MasterPort 2 sendet sACN according to E1.31 R0 Draft
Art-Net
BC Art-Net is sent as broadcast. Its necessary for the control of ADB systems.
Art-
Net3Nw Setting the IP address Art-Net3–networks.
0:
Art-Net3 is disabled.
1 to 127: Art-Net3 is active and the number indicates the IP address.