LSS MasterPort 2, Manual

Page: 12 / 68

MasterPort 2
12
Remote configuration
For all devices of LSS the freeware LSS ConfigCore is recommended. All features of the MasterPort
2 and other LSS devices, but also Art-Net compatible devices of other manufacturers will be sup-
ported. Only with this freeware it is possible to find all devices on the network and configure the
MasterPort 2 fully remotely.
Because the
MasterPort 2 is an Art-Net compatible device itself so it works fine with Art-Net soft-
ware tools of other manufacturers, especially DMX Workshop (download at
www.artisticlicence.com). Of course, like all other Art-Net devices the
MasterPort 2 has an own
OEM ID (identified and supported by DMX Workshop version 3.57 and higher). Using this tool, also
a restricted remote configuration is possible. By using DMX Workshop note Art-Net can only con-
figure a subset of the
MasterPort 2 .
If other protocols than Artet will be set the MasterPort 2 will be always configurable
with ConfigCore. Providing that the PC with ConfigCore is in the same IP address range
like the
MasterPort 2 .