LSS MasterPort 2, Manual

Page: 10 / 68

MasterPort 2
10
Functional overview
DMX
Connectors
The LSS MasterPort 2 is available with three DMX connector designs:

4x DMX-Out, 5pin XLR female

2x DMX-Out, 5pin XLR female / 2x DMX-In, 5pin XLR male

4x DMX-In, 5pin XLR male
In all designs the DMX ports are electrical isolated bey opto-coupler.
DMX Outputs
For all DMX outputs the following parameters can be set:

Response to reception loss of all sources (power off, hold, send zeros)

Break length 90 ... 999 ĩS

Mark After Break 20 ... 999 ĩS
So the
MasterPort 2 is adjustable to each component.
The MasterPort 2 can only be used as a protocol converter between DMX and Ethernet-
based network protocols. For conversions of Ethernet to Ethernet a LSS MasterGate
must be used!
DMX Inputs
For all DMX inputs the following parameters are set by manufacturer:

Maximum data rate: Up to 44/s = protocol length 22,4ms

Minimum Mark After Break: 4μs

Timeout until data loss: 2s.
All DMX signals are processed by the controller logical and evaluated.