LSS MasterPort 2, Manual

Page: 37 / 68

MasterPort 2
LSS
37
Selection Meaning
Contrast Setting the contrast
MenuTimeout Timeout setting for the return to the First Level, when the encoder is not
used.
(OFF, 15s, 30s, 1m, 3m, 5m, 10m, 15m, 20m, 30m, 45m, 1h, 2h, 3h, 4h, 6h, 8h,
12h, 24h)
ScreenSaver Timeout setting for the screensaver. After the set time the screensaver turns
off the screen. This measure increases the lifetime of the display siginificantly.
Inputs by the encoder or by remote control and events turn on the screen.
(OFF, 15s, 30s, 1m, 3m, 5m, 10m, 15m, 20m, 30m, 45m, 1h, 2h, 3h, 4h, 6h, 8h,
12h, 24h)
Events Changes to the DMX or Ethernet can trigger events, which can be automatical-
ly displayed on the screen. This can lead to disruptive effects of light.
On:
Changes turn on the screen und will be displayed
Off: Changes have no effect on the screen
Debug On: Turn on the debugger
Off: Turn off the debugger
Default Replaces the display First Level by following options:
Scroll:
“First Level” scrolls through diagnostic pages
UserTxt: Displaying a user-specified text. When activated, below the line
a new input mask for text input is displayed.
FixScreen: A specific diagnostic page from the "First Level" is displayed
permanently. When enabled, the row below a selection of the
diagnostic pages will appear.
1: Serial – shows device and software details
2: Counters – shows different counters and measured data
3: NW-Info – shows Ethernet details
4: N-In – Overview of receiving Ethernet data
5: DMX – Overview of transmitted DMX data
6: PSU-State – Shows output voltage and current per port
►
Change settings
◄
Return to parent menu / Save settings