LSS MasterPort 2, Manual

Page: 15 / 68

MasterPort 2
LSS
15
Types of power supply - PoE or external power supply
The power supply of the MasterPort 2 can be realized either via Power-over-Ethernet (PoE) or with
an external power supply.With PoE the power supply can be ensured by end-span devices (eg di-
rectly PoE-capable switches) or midspan devices (units between switch and end device).
PoE has priority, if the
MasterPort 2 is connected on both types of power supply.
Operation LED
The LEDs on the front panel displays the operating status of the MasterPort 2 .
LED Colour Meaning
Power Blue On: Operation voltage available
Off: Operation voltage is not available
LINK/DATA Yellow On: Ethernet-LINK enabled, no Data
Flash: Ethernet-LINK enabled, running Data transfer
Off:
Ethernet-LINK is not enabled
ACTIVE/FAIL Green
Red
DMX display for all DMX ports
On:
At least one DMX port is running
Blink: At least one port has no data and HOLD last received data
Flash: At least one port has no data and sends ZERO
Out: All ports are turned off
Displays error messages
Blink: Software error. Inform service!
On:
Combined error. Inform service!
Inside the device, further diagnostic LEDs are provided. These are intended for service and
maintenance.