Chapter 5 XG5000 Program
5-18
5.3.2 High Speed Link parameter at XGR redundant system
Standard setting is same with XGK, XGI but parameter of communication module of MASTER
and STANDBY should be set respectively. At redundant system, available number of module
is up to 6.
(1) Standard settings
For standard setting in redundancy, you can set one HS link station number and IP
address etc. by using One IP Solution or can set parameters of A side and B side
separately by not using One IP Solution. For more detail, refer to CH6 High Speed Link
service.
[Fig 5.3.11] Redundant standard setting screen
