LSIS sv-ig5a, User Manual

Page: 160 / 186

11-6
4) Action Request for monitor register: Request for read of address registered by monitor register.
ENQ Drive No CMD SUM EOT
05h
“01” ~ “1F” “Y” “XX”
04h
1 byte 2 bytes 1 byte 2 bytes 1 byte
Total bite = 7
4.1) Acknowledge response:
ACK Drive No CMD Data SUM EOT
06h
“01” ~ “1F” “Y” “XXXX…” “XX”
04h
1 byte 2 bytes 1 byte n * 4 bytes 2 bytes 1 byte
Total bite= 7 + n * 4 = Max 39
4.2) Negative response:
NAK Drive No CMD
Error code
SUM EOT
15h
“01” ~ “1F” “Y” “**” “XX”
04h
1 byte 2 bytes 1 byte 2 bytes 2 bytes 1 byte
Total bite = 9
5) Error code
Error code Description
“IF”
When master is sending codes other than Function code (R, W, X, Y).
“IA”
When parameter address does not exist
“ID”
When Data value exceeds its permissible range during
„W‟ (Write).
“WM”
When the specific parameters cannot be written during
„
W
‟ (Write).
(For example, in the case of Read Only, Write disabled during Run)
“FE”
When frame size of specific function is not correct and Checksum field is
wrong.
11.7 Parameter code list <Common area>
(Note1)
<Common area>: Area accessible regardless of inverter models (Note 2)
Address Parameter Scale Unit R/W Allotment for Bits
0x0000
Inverter model
- - R A : iG5A
0x0001
Inverter capacity
- - R
FFFF :
0.4kW 0000 :
0.75kW 0002 :
1.5kW
0003 :
2.2kW 0004 :
3.7kW 0005 :
4.0kW
0006 :
5.5kW 0007 :
7.5kW 0008 :
11kW
0009 :
15kW 000A :
18.5kW 000B :
22kW
For Service Call 800-848-2504
For Service Call 800-848-2504