![background image](http://html.mh-extra.com/html/lsi-robway/rci-1550-hrt/rci-1550-hrt_instruction-manual_1944228053.webp)
Page 50 of 72
Maximum boom deflection occurs when the boom is fully telescoped and a load, which
approaches the SWL, is suspended on the hook. On duties where the winches are both
assumed to be reeved over the main boom head it is necessary to calibrate only for the main
winch (winch 1). However, when a jib is installed it is possible to calibrate boom deflection
both for the main boom head and for the head of the jib.
When editing the radius correction the LCD display should appear as in diagram 21. If the
load is less than the “Lift Threshold” setting, the message “No Lift in progress” is displayed.
CORRECT RADIUS
F24:
Radius = 3
4.43
Edit = 11
.4
hh:mm
Diagram 21
7.2.15 VIEW DIRECTIONS item
The Hoist directions for winch 1, 2 and 3 can be viewed (if installed) and the Luff direction of
the boom is displayed in this function code ( see diagram 37).
Note 1: N/A represents
Not Applicable
Note 2: Stat represents
Stationary
7.2.16 VIEW LOAD-CHART item
This function code is intended to allow easy viewing of the SWL over the operating range of
the crane. This mode should NOT be used to actually monitor a lift, however, it is useful for
determining whether a specific load will be tolerated at the desired operating position.
The main and auxiliary ( if there is more than one hook ) safe working loads can be viewed.
The main and auxiliary radii are also displayed.
File : 1550-Telescopic-HRT.DOC
Issue Date: - 01/08/05
Summary of Contents for RCI-1550 HRT
