LSI-Robway RCI-1550 HRT, Instruction Manual

Page: 67 / 126

Page 64 of 72
8 MAINTENANCE
When maintenance is to be performed on the RCI-1550 system, care must be taken to ensure
that the level of safety is not reduced. Such a reduction in the level of safety can easily be
done by the careless use of tools or test equipment, either directly or by damage to safety
components, wiring or clearances. Therefore it is essential that maintenance be performed by
competent personnel only.
The following are recommendations from the standard on maintenance procedures.
8.1 CHECK LIST
It is recommended that a checklist similar to the one below be prepared prior to maintenance.
Maintenance Checklist
Pre-maintenance
Necessary documents are available
All records have been examined.
Test gear is available and is satisfactory for use in
hazardous areas if applicable.
Permission to commence work has been granted.
The area is safe to work.
Any necessary precautions have been taken.
Maintenance All re-connections have been made.
Equipment is functional.
Malfunctions have been reported.
Installation conforms to drawings and
documentation.
Any modifications have been approved.
Earthing requirements are still valid.
General check in accordance with an Inspection and
Test Schedule completed.
Post-maintenance Documentation is completed and filed.
Inspection report is complete.
Company and operator requirements have been
satisfied.
File : 1550-Telescopic-HRT.DOC
Issue Date: - 01/08/05