LSI-Robway RCI-1550 HRT, Instruction Manual

Page: 25 / 126

Page 22 of 72
winch), the Lift in progress screen will be displayed. This inhibits the altering of
configuration once a lift has begun. If it is imperative to change the configuration even
though a lift is being monitored, it is possible to change the duty and or falls in calibration
mode provided you have the correct access code.
When no lift is in progress it is possible to change any of the items that describe the crane
configuration.
Selecting to change the duty will cause a series of screens to be displayed prompting the
operator to select each aspect of the current crane configuration.
Once editing is complete, pressing the OK button changes the duty according to the selections
made, if possible, else a message is displayed informing the operator that there is no duty
provided that matches the selections made.
Selecting to change the falls will bring up the falls change screen, provided that no lift is
currently in progress. This screen allows the operator to set the currently reeved falls
for the
currently selected winch .
The falls can be changed by either using the Up/Down keys or by using the numeric buttons.
Once editing has been complete, pressing the OK button effects the change to the new edited
value. If the cancel button is pressed the edit is discarded and the display returns to the main
menu.
5.7.2 Function Codes
Refer to the Function listing at the rear of the manual for detailed information on the available
function codes.
5.7.3 Display Options Menu
This menu contains the settings that are specific to the look and “feel” of the display unit
itself. Such items include the units displayed, the volume of the buzzer and contrast of the
display as well as the setting for the Acknowledge Timeout.
5.7.3.1 Acknowledge Time-Out
Sets the time for which the acknowledge soft menu button will silence the in cabin alarm and
hide any errors.
File : 1550-Telescopic-HRT.DOC
Issue Date: - 01/08/05